| Quantity: | |
|---|---|
Land Use
Emergency Crew, Standby Unit, Common Units
DC
Air Cooled
Fixed
Diesel Generator
SX460
Black
Carton
175*150*65mm
China
8503009090
US$ 30/Piece 1 Piece(Min.Order) | Request Sample
Product Features
1.Introduction:
SX460 is a half-wave phase- controlled thyristor type Automatic Voltage Regulator and forms
part of the excitation system for a brushless generator. In addition to regulating the generator
voltage, the AVR circuitry includes under speed and sensing loss protection to ensure safe,
reliable control of the generator. Positive voltage build up from residual levels is ensured by
the use of proficient semiconductors inthe power circuitry of the AVR. Which is linked with the
main stator windings and the exciter field windings to offer closed loop control of the output voltage
with load regulations of +/- 1.5%
Stability adjustment
Under frequency roll off adjustment
2.Technical data:
Parameter sheet of Standford AVR SX460 | |||
Input | Voltage | Jumper selectable 95-132V ac or 190-264V ac | |
Frequency | 50-60 Hz nominal | ||
Phase | 1 | ||
Output | Voltage | max 90V dc at 207V ac input | |
Current | continuous 4A dc, intermittent 6A for 10 secs | ||
Resistance | 15 ohms minimum | ||
Regulation | +/- 1.0% | ||
Thermal Drift | 0.05% per deg. C change in AVR ambient | ||
Typical system response | AVR response | 20ms | |
Filed current to 90% | 80 ms | ||
Machine Volts to 97% | 300ms | ||
External voltage adjustment | +/-10% with 1 k ohm 1 watt trimmer | ||
Under frequency protection | Set point | 95% Hz | |
Slope | 170% down to 30 Hz | ||
Unit power dissipation | 12 watts maximum | 10 watts maximum | |
Build up voltage | 4 Volts @ AVR terminals | ||
Environmental | Vibration | 20-100 Hz,50mm/se | |
100Hz - 2kHz, 3.3g | |||
Operating temperature | -40 to +70 Deg. C | ||
Relative Humidity 0-70 Deg. C | 95% | ||
Storage temperature | -55 to +80 Deg. C | ||
3. Pictures
Product Features
1.Introduction:
SX460 is a half-wave phase- controlled thyristor type Automatic Voltage Regulator and forms
part of the excitation system for a brushless generator. In addition to regulating the generator
voltage, the AVR circuitry includes under speed and sensing loss protection to ensure safe,
reliable control of the generator. Positive voltage build up from residual levels is ensured by
the use of proficient semiconductors inthe power circuitry of the AVR. Which is linked with the
main stator windings and the exciter field windings to offer closed loop control of the output voltage
with load regulations of +/- 1.5%
Stability adjustment
Under frequency roll off adjustment
2.Technical data:
Parameter sheet of Standford AVR SX460 | |||
Input | Voltage | Jumper selectable 95-132V ac or 190-264V ac | |
Frequency | 50-60 Hz nominal | ||
Phase | 1 | ||
Output | Voltage | max 90V dc at 207V ac input | |
Current | continuous 4A dc, intermittent 6A for 10 secs | ||
Resistance | 15 ohms minimum | ||
Regulation | +/- 1.0% | ||
Thermal Drift | 0.05% per deg. C change in AVR ambient | ||
Typical system response | AVR response | 20ms | |
Filed current to 90% | 80 ms | ||
Machine Volts to 97% | 300ms | ||
External voltage adjustment | +/-10% with 1 k ohm 1 watt trimmer | ||
Under frequency protection | Set point | 95% Hz | |
Slope | 170% down to 30 Hz | ||
Unit power dissipation | 12 watts maximum | 10 watts maximum | |
Build up voltage | 4 Volts @ AVR terminals | ||
Environmental | Vibration | 20-100 Hz,50mm/se | |
100Hz - 2kHz, 3.3g | |||
Operating temperature | -40 to +70 Deg. C | ||
Relative Humidity 0-70 Deg. C | 95% | ||
Storage temperature | -55 to +80 Deg. C | ||
3. Pictures
